What is Narrow Woven?

Narrow Woven

Narrow textile fabrics are obtained by weaving, crochet and warp knitting techniques. A lot of information on why these new techniques are needed will be discussed later. But briefly speaking, the economic calculations made in some products, for example; clothes, shoes, hats and decorative packaging, especially by using warp knitting, yield increased 25-30 times and production increased 3-4 times. The low cost of setting up a narrow (belt) weaving mill makes it possible for individuals to work with cheap capital alone, by taking a special weaving or hooking machine at low prices.

Narrow textile fabrics are obtained by weaving, crochet and warp knitting techniques. A lot of information on why these new techniques are needed will be discussed later. But briefly speaking, the economic calculations made in some products, for example; clothes, shoes, hats and decorative packaging, especially by using warp knitting, yield increased 25-30 times and production increased 3-4 times. The low cost of setting up a narrow (belt) weaving mill makes it possible for individuals to work with cheap capital alone, by taking a special weaving or hooking machine at low prices.

Generally, 20/2 Ne (17Nm) ecru cotton, 20/2 Ne (17Nm) matt white cotton, etc. cotton yarns are using in the sector. Cotton narrow bands are generally in heavy webbing products. Another description of Polyester grouped yarns are, the yarn is get together when you leave it.Main description of Elastic band is, there is elastomer elastic yarns in its warps. Thinness and thickness of yarn changes on the elastic specificity product’s description of Narrow Woven and Braided.
The characteristic of the elastic bands is the presence of elastomeric rubber threads in the warp. Knitting and weaving also vary in thickness and thickness compared to the product of the rubber thread used in the elastic band in Tekis Lastik . There are two kinds of rubber yarn; 30/40 thick rubber 44/50 thin rubber.

In narrow textile market 36/40 thick latex and 44/50 thin latex are generally used. The numbers of the rubber yarns are separated by a line from the center. The yarn number is the amount that a single 1 inch (25.4 mm) wire creates when it comes side by side. These yarns have a certain circle section or diameter in Tekis Lastik. The actual number of the yarn in the circle with a diameter of 25.4 mm, and the number of the yarn of the square yarn with a square cross section. When the number of the square cross is requested, the number of the round cross section is found by multiplying by the standard number 1.13. (Such as 44/50 fine latex; 44 x 1.13 = 49.72 = 50).

Elastic bands of elastic bands that are touched or knitted may sometimes exceed 100%. For example, trouser hangers are over 100%
It can rotate. In such tapes, in the case of pulling, it is desirable that the permanent extension is excessive. In weaving and knitting machines, there are cylindrical rods that provide tension between the rubber threads, the band drawing rollers, and the rubber feeding rollers.

Narrow weaving machines are special weaving machines which are designed for serial production, with narrow end fabrics or passages which weave tapes with variable characteristics by making regional weaving. It differs from other weaving machines in general. Narrow weaving machines have a flexible structure. It is possible to change the band name with different weaving heads in a very short time in these machines. The output is very high in terms of production in Tekis Lastik.

The factors such as the width, the pattern mechanism used, the frame design, the characteristics of the raw material affect the machine speed. To get these things, it is possible to reach these speeds at the machine; 2400 wefts per minute (1200 rpm), 2800 weft per minute (1400 rpm), 750 rpm, depending on the products to be touched.
The warps of narrow weaving machines are prepared in specially developed straight weaving machines, which are specific to such weaving looms. In these machines, the warp yarn is directly weighed in dimensions. The warp yarns of the narrow weaving machines are prepared in such a number as to have a number of passages in the machine. So his warp in the weaving machine works independently.
There are three different narrow weaving looms. These narrow weaving machines are classified according to the shedding or surfacing element

 

Leave a Reply

Your email address will not be published. Required fields are marked *

en_USEnglish
tr_TRTürkçe de_DEDeutsch ru_RUРусский arالعربية en_USEnglish